Disclaimer: The information in this site is provided to you as a free service. We strive at ProgramKeyFob.com to have the most current and accurate information. ProgramKeyFob.com and its creators assume no responsibility for the accuracy or inaccuracy of the information provided.


2007 GMC Acadia Key Fob Programming Instructions

2007 Acadia

This information is in your Owners Manual in the Drivers Information Center Section.

  1. Insert Key and turn to ON position so you can access Driver Information Center
  2. Press the vehicle information button until PRESS TO RELEARN REMOTE KEY displays
  3. Press the set/reset button until REMOTE KEY LEARNING ACTIVE displays
  4. Press and hold the lock and unlock buttons on the first keyless remote at the same time for approximatley 15 seconds. A chime will sound indicating that the remote is programmed. On vehicles with memory recall seats, the first remote learned will match Driver 1 and the second will match Driver 2.
  5. To program additional remotes at this time repeat step 3. This vehicle can have a maximum of eight remotes programmed.
  6. To exit programming mode turn key off and remove key.
    Test remote(s).